- What are the types of fall protection?
- What is a safe working height?
- What is the OSHA standard for fall protection?
- What is considered a leading edge?
- What is meant by leading edge?
- What is the 6 foot rule in construction?
- Which is the best example of a fall prevention system?
- What is passive fall protection?
- What are the 4 methods of fall protection?
- At what height is fall protection required on scaffolds?
- What item is an example of fall protection?
- At what height must a safety harness be worn?
- What does OSHA consider a safe distance from an open floor edge?
- What does leading edge mean in fall protection?
- Which fall protection is not allowed at a leading edge?
What are the types of fall protection?
Two basic types of fall protection are travel restraint and fall arrest.
Both involve wearing a full-body harness.
A travel restraint system keeps you from getting too close to an unprotected edge.
The lifeline and lanyard are adjusted to let you reach the edge but not fall over it..
What is a safe working height?
Best Practices At Safe Working Height Generally, safe working height on a ladder is defined as about ¾ of the way up it. If you need to go higher than that, you may think it looks possible but it definitely won’t be safe – you’ll need to get a higher ladder!
What is the OSHA standard for fall protection?
OSHA requires that fall protection be provided at elevations of four feet in general industry workplaces, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations.
What is considered a leading edge?
Leading edge means the unprotected side and edge of a floor, roof, or formwork for a floor or other walking/working surface (such as deck) which changes location as additional floor, roof, decking or formwork sections are placed, formed or constructed.
What is meant by leading edge?
1 : the forward part of something that moves or seems to move. 2 : the foremost edge of an airfoil.
What is the 6 foot rule in construction?
The 6-foot rule. Subpart M requires the use of fall protection when construction workers are working at heights of 6 feet or greater above a lower level.
Which is the best example of a fall prevention system?
Physical barriers like guardrails around unprotected edges and covers over holes are examples of passive fall protection. Passive protection is generally considered to provide a higher level of safety since the opportunity for error is less than using personal protective equipment (PPE).
What is passive fall protection?
A “passive” fall protection system refers to a system that is non-dynamic, stationary, and does not move or adapt or change when in or out of use. They do not require the use of Personal Protective Equipment or active participation from the worker. Typical passive solutions include Guardrails or Netting Systems.
What are the 4 methods of fall protection?
There are four generally accepted categories of fall protection: fall elimination, fall prevention, fall arrest and administrative controls.
At what height is fall protection required on scaffolds?
10 feetOSHA’s scaffolding standard has several key provisions: Fall protection or fall arrest systems — Each employee more than 10 feet above a lower level shall be protected from falls by guardrails or a fall arrest system, except those on single-point and two-point adjustable suspension scaffolds.
What item is an example of fall protection?
Scaffolds, handrails, barriers and movable platforms can be constructed to protect workers employed at heights. Where these devices are impractical, personal fall protection equipment such as full body harnesses, lanyards and retractable lifelines may be used.
At what height must a safety harness be worn?
6 feetCurrently, OSHA requires that employers provide fall protection for construction workers on a walking or working surface with an unprotected edge that is 6 feet or more above a lower level.
What does OSHA consider a safe distance from an open floor edge?
15 feetKeith Harkins, OSHA stated that a warning line system set 15 feet from an unprotected edge is permitted to be used instead of conventional fall protection to protect employees engaged in non-roofing activities.
What does leading edge mean in fall protection?
A leading edge is any unprotected edge of a platform, floor, or other construction point where the elevation between the next level or the ground is greater than six feet. Here’s how OSHA defines it.
Which fall protection is not allowed at a leading edge?
Each employee on a walking/working surface 6 feet (1.8 m) or more above a lower level where leading edges are under construction, but who is not engaged in the leading edge work, shall be protected from falling by a guardrail system, safety net system, or personal fall arrest system.